When removing asbestos floor tiles, it?s essential to keep in mind that you should remove them only when it?s necessary. In some situations, such as during a renovation, removing asbestos floor tiles is needed so that the renovation can go on smoothly. If you plan to do the removal by yourself, you will need to know how to remove them the right way.
That said, here are six steps to follow to ensure that the removal process will go as smoothly as possible:
1. Ensure that the area is ready for asbestos removal
When performing the asbestos floor tile removal, keep in mind that you will need to remove whole pieces of the tile. This is because when asbestos particles are released into the air, it can cause harmful effects on human health.
In ensuring that the area is ready for removal, you will need to keep all your belongings within the area protected and make sure to remove all movable objects. Use plastic to protect doors, windows, and vents, among others. Secure the plastic with duct tape and turn off the heat and air conditioning systems as well.
2. Wear proper attire
Before you begin the removal, make sure to get your coveralls, goggles, mask, gloves, and boots ready. Wearing the right attire for this job is crucial. Not only will it protect you from getting hurt, but this will also prevent you from breathing in the harmful asbestos particles.
3. Remove tiles
Know that you will need to start with the asbestos floor tile removal from the edges of the room. Use a hammer and a putty knife for this task. When the first tile is removed, work on the next tile at a 45-degree angle. Make sure to do this gently as you don?t want to break tiles during removal because this increases the likelihood of asbestos getting into the air.
4. Wet the floor
Keep in mind that the dust will eventually settle on the floor, and you can?t risk that when you?re dealing with harmful materials like asbestos. This is why you should always have a wet towel or mop with you, and make sure to mop the area after each tile is removed. This will prevent the dust from getting into the air. Make sure to regularly change the water as well and use liquid detergent for a stronger solution.
5. Dispose of debris properly
Make sure to contact your local government and ask where you can dispose of your asbestos-filled tiles. Remember, you just can?t throw it at a random landfill near you because that can harm the lives of other people. Place the tiles and other debris inside a waste bag and seal them with duct tape.
6. Clean up
Wipe down the area using damp disposable towels, and make sure to rinse them and change the water often to prevent recontamination. After that, double or even triple check the area to ensure that it is free of dust and debris. Clean all tools as well before you take them out of the work area.
Although asbestos floor tile removal is a delicate process, it?s not impossible when you follow the steps given in this article to ensure the utmost safety at all times.
If you?re looking for an asbestos tile removal service in St Louis, Missouri, get in touch with us today to see how we can help.